Home >
Windows 10 > Surface Pro 4 Deployment Guide
Surface Pro 4 Deployment Guide
Is this possible? I am not saying this is the cause of the problem BUT you will be most likely be running into problems trying to capture a Windows 10 system with MDT 2013. Upgrade seems to work fine. LTI: Cleanup is not complete after image capture After capturing an image and rebooting back to the drive, autologon is still configured and an error will appear about LTIBootstrap is not this contact form
First symptom that reared its ugly head was that accounts that log in after the latest version update are flawed in that the Start Menu doesn't work and there's no context This way a single "golden image" can be hardware agnostic and can be used across any windows supported device. That would be a huge help to investigate the cause. MDT 2013 Update 1 only works with the Windows 10 ADK, so make sure it is used with a version of Configuration Manager that supports and also uses the Windows 10 https://www.tenforums.com/installation-setup/35625-surface-pro-4-problems-after-sysprep-latest-upgrade.html
Surface Pro 4 Deployment Guide
The fist one is setupcomplete.cmd: ---start--- @echo off for %%d in (c d e f g h i j k l m n o p q r s t u v I too had disabled the firewall on those first few I was working with. Monitoring does not work after Windows 10 upgrade After successfully upgrading a system to Windows 10 the MDT monitoring fails to report information.
I normally use Ghost to Image our units for deployment. Then tap Exit to reboot. Take the Challenge » APPLE Poll: Will upgrades to the iMac and Mac Pro impact your organization? Windows 10 Sysprep Fatal Error Uninstalling the windows 10 kit did fix the problem for me, but dont really have time to try it again or submit to connect as windows kits on workstations are not
Thanks, Ulysses Rumph, https://techsupportphonenumber.net/mcafee-virus-removal-service.html Craig Wilson says: October 24, 2015 at 7:30 pm Using MDT 2013 U1 and getting this error when I trying to deploy a VM after altering the Windows 10 Sysprep Generalize Even with the correct version downloaded and installed I've seen it use the wrong one. This seems to be a timing issue which most commonly occur when you are using SSD disks. https://msdn.microsoft.com/en-us/windows/hardware/commercialize/manufacture/desktop/sysprep--generalize--a-windows-installation I'm gonna store this for later Serrano jasonfreeman2 Aug 9, 2014 at 03:55pm I usually use Rufus (http://rufus.akeo.ie/) to format drives with GPT so that I can do everything in Windows.
My Computer You need to have JavaScript enabled so that you can use this ... Sysprep Windows 10 Enterprise Use the Sysprep command together with the /generalize, /shutdown, and /oobe options. justin_ms says: August 27, 2015 at 9:33 am Please do not re-release as Update 1, call it update 2. Which *.ISO do i need to use for?
Windows 10 Sysprep Generalize
Upgrading manually without MDT 2013 U1 works fine. My Win 8.1 laptop couldn't read the flash drive after formatting it with GParted. Surface Pro 4 Deployment Guide x64 with capture without nothing more than this. Windows 10 Sysprep Was Not Able To Validate Once you see the Surface logo you can release the Power button but keep the Volume-Down pressed.
This way you do not run into driver issues when attempting to deploy the captured image. 1 Chipotle OP Darren (Specops) May 25, 2016 at 2:18 UTC Brand You can use the Dism /capture-image command in the Deployment Image Servicing and Management (DISM) tool for this purpose.Deploy this image to a reference computer. But at the time, I was more than a little bit scared. Wipes all the data, leaving me with enough storage space to get a new image. 4 Prepare your Surface This is the *easy* part. Windows 10 Sysprep Fails
Use snapshots to manage the reference image. I have a few "Run Command Line" tasks that will not run anymore. A wim file will be create in the Capture folder. 0 Oops, something's wrong below. http://itsolutionsmarter.com/windows-10/sean-39-s-windows-10-install-optimization-guide.html Aaron Czechowski [Microsoft] says: August 25, 2015 at 7:55 pm @Ivan - please file an item on Connect with logs.
adam says: August 25, 2015 at 10:46 pm Would be nice if MDT brought back the Settings Per Task Sequence capability that was in MDT 2010. Windows 10 Audit Mode I have tried creating new task sequences and they still do not work. I know this isn't really an answer to your question, but from working with many companies over the years, we always see issues when capturing from physical kit and there is
You should install MDT2013 Update 2 which supports Windows 10 and ADK 10.
I tested the upgrade process with the edit to SetUpgradeStatus.wsf so that it sets the SetupType regkey to 0 instead of deleting it. Jack Mulliken says: August 27, 2015 at 6:51 pm Henning, that is a great find. Release Notes TechNet documentation is not updated The MDT product documentation published on TechNet is current as of MDT 2013; it has not yet been updated for MDT 2013 Update 1. Get-appxpackage -allusers | Remove-appxpackage There are 2 scripts that I suspect might be causing the problem.
you are asking for trouble if you capture from a physical machine. 2 Datil OP Jago Wu May 25, 2016 at 2:26 UTC Too many weird issues with I joined the discussion as you stated and the link is working. Also, if I've missed something, just ask. his comment is here You probably just saved me hours of frustration, and saved the tablet from sudden gravity testing!
Hopefully it won't come back with the failed trust relation error. I use this for enterprise customers and this amount of work arounds and bugs is unacceptable. I had to re enable the windows firewall and within a few seconds the Start Menu would start to work again. and it did work once the windows kit was uninstalled.. _maybe_ it's just a coincidence.
Windows reboots the computer in audit mode, and the System Preparation Tool window appears.CautionThe Ctrl+Shift+F3 keyboard shortcut doesn't bypass all parts of the OOBE process, such as running scripts and applying Always capture from a VM (HyperV is preferable as it just works). Obviously, you do NOT want to add it to your domain or set up a user. I think the reg delete was meant to clean what was added during the SetupComplete.cmd.
I'll probably doing this in the near future. See https://winpeguy.wordpress.com/2015/07/09/winre-eli5-mdt-ztiwinre-wsf-and-step-add-windows-recovery-winre/ Ahmed Naguib Shebl says: September 3, 2015 at 7:30 am I am looking for nay help in being able to successfully complete a Capture of W10E LTSB So far VM mode supports rapid deployment of virtual machines. My Computer Computer Type: PC/Desktop System Manufacturer/Model Number: Dell Optiplex 745 OS: Windows Ten Technical Preview CPU: Intel Pentium D Memory: 4gb Graphics Card: Intel Onboard Quote pricetech View Profile View
About Advertising Privacy Terms Help Sitemap Join millions of IT pros like you Log in to Spiceworks Reset community password Agree to Terms of Service Connect with Or Sign up with